Optimization of ships in shallow water with viscous flow computations and surrogate modeling

Optimization of ships in shallow water with viscous flow computations and surrogate modeling

Rotteveel, E. (TU Delft Ship Design, Production and Operations)
van der Ploeg, A (Maritime Research Institute Netherlands (MARIN))
Hekkenberg, R.G. (TU Delft Ship Design, Production and Operations)

Nielsen, U.D. (editor)
Jensen et al, J.J. (editor)

2016

Shallow water effects change the flow around a ship significantly which can affect the optimum design of the hull. This paper describes a study into the optimization of the aft ship region for various water depths. The research focuses on variations of the following parameters of a hull form: The athwart ship’s propeller location, the tunnel top curvature, the flat-of-bottom shape in the stern region and the stern bilge radius. All hull form variants are valuated in 3 different water depths using a viscous flow solver, and a surrogate model is created for each water depth. Pareto plots are used to present the trade-off between the optimization for one or another water depth. Finally, specific hull forms are chosen and the differences in flow behavior among hull forms and water depths are explained.

Hull form optimization
Computational Fluid Dynamics
Inland ships
Shallow Water

http://resolver.tudelft.nl/uuid:43f8b616-94fd-4cc1-b72e-16e9b070dd29

PRADS Organising Committee, Copenhagen, Denmark

978-87-7475-473-2

Proceedings of the 13th International Symposium on Practical Design of Ships and Other Floating Structures

International Symposium on Practical Design of Ships and Other Floating Structures, PRADS'2016, 2016-09-04 → 2016-09-08, Copenhagen, Denmark

Institutional Repository

conference paper

© 2016 E. Rotteveel, A van der Ploeg, R.G. Hekkenberg