Non-Associated Plasticity for Soils, Concrete and Rock

Non-Associated Plasticity for Soils, Concrete and Rock

Vermeer, P.A.
De Borst, R.

Civil Engineering and Geosciences

Geotechnical Laboratory

1984-01-01

With reference to practical engineering problems it is shown that considerable differences may be encountered between the results from associated and those from nonassociated plasticity theories. Next, the need for a non-associated plasticity theory is demonstrated by considering test results for sand, concrete and rock. Elementary material parameters are discussed such as Young's modulus and Poisson's ratio for the description of the elastic properties; and a cohesion and a friction angle for the determination of the strength. The salient difference from associated plasticity theory concerns the introduction of a dilatancy angle which controls the inelastic (plastic) volume changes. This dilatancy angle is not only a suitable parameter for the description of soils, but also appears to be useful for concrete and rock. Basically, the paper consists of three parts as we consider three types of models of increasing complexity. The first model is a perfectly-plastic model, which employs the five aforementioned parameters. It is based on test data rather than on Drucker's hypothesis of material stability. The consequences thereof are examined. The second model is a straightforward extension of the first model by augmenting it with friction hardening and cohesion softening. This novel idea is introduced to account for the degradation of the cohesion of cemented granular materials with increasing inelastic deformation. The model is employed in an analysis which shows that plastic deformations tend to localize in thin shear bands, which may occur even before peak strength is reached. Finally, a review is given of concepts for modelling hysteresis and strain accumulation in cyclic loading. The concept of a bounding surface in addition to a yield surface is discussed and is adapted for use in a sophisticated model for loose and cemented granular materials under cyclic loading.

http://resolver.tudelft.nl/uuid:4ee188ab-8ce0-4df3-adf5-9010ebfaabf0

Delft University of Technology

0046-7316

HERON, 29 (3), 1984

Institutional Repository

journal article

(c) 1984 The Authors