Optimization of Kiln Feed Yield through an Analysis of Drilling and Blasting Parameters in a Quarry

Optimization of Kiln Feed Yield through an Analysis of Drilling and Blasting Parameters in a Quarry

Waheed, Atif (TU Delft Civil Engineering & Geosciences)

Buxton, M.W.N. (mentor)
Hennig, Dr. Alexander (mentor)
Guerrero, Dr. Rodrigo Serna (mentor)
Weimer, Lucas (mentor)

Delft University of Technology

Applied Earth Sciences | European Mining Course

2019-08-13

Blasting and drilling serves as an essential element for a mining operation to excel. Optimization of this operational aspect, requires consideration of various parameters that can be controllable or uncontrollable. To overcome the tediousness of analyzing each element selectively, some major parameters are outlined, and each blast is rendered relative to the other, by organizing the data from each blast design and integrating it in an empirical model called Kuz-Ram Model, which further can be used for predicting the impact of these parameters on fragmentation. Image analysis aids in validating the model credibility for using it as step forward for proposing alterations to the current practices in drilling and blasting area. Each image is processed with the help of Unmanned Aerial Vehicle, for safety and coverage of complete muck-pile. The study involves in depth focus on the impact of rock mass characteristic over fragmentation as well. Discontinuities, fractures, joint orientation and fillings are considered in designating each rock zone to specific class with the help of a geo-mechanical classification system called, Rock Mass Rating. To test the theory, an exercise is performed by separating two zones of variable rock mass properties and then the procedure is followed with empirical calculation, image analysis and supported by preferential loading to acquire a broad image of each zone fragmentation profile. Suggesting the variation in particle size distribution due to rock mass influence. The collected data and analyses shall serve as supporting tools for changes to blast design for obtaining desired fragmentation, which is synonymous to increasing the feed of kilns.

Mining
Blasting
Empirical models
Image analysis

http://resolver.tudelft.nl/uuid:58190053-89a4-4329-b23e-ea6a605a0bbd

Student theses

master thesis

© 2019 Atif Waheed