Title
Final results from the EU project AVATAR: Aerodynamic modelling of 10 MW wind turbines
Author
Schepers, J.G. (ECN Solar Energy)
Boorsma, K. (ECN Solar Energy)
Sorensen, N. (Technical University of Denmark)
Voutsinas, V. (National Technical University of Athens)
Sieros, G. (National Technical University of Athens)
Rahimi, H. (ForWind; Fraunhofer IWES)
Heisselmann, H. (ForWind)
Jost, E. (University of Stuttgart)
Lutz, T. (University of Stuttgart)
Maeder, T. (GE Global Research - Europe)
Gonzalez, A. (CENER)
Ferreira, Carlos (TU Delft Wind Energy)
Stoevesandt, B. (Fraunhofer IWES)
Barakos, G. (University of Glasgow)
Lampropoulos, N. (CRES)
Croce, A. (Polimi)
Madsen, J. (LM Wind Power)
Date
2018-06-19
Abstract
This paper presents final results from the EU project AVATAR in which aerodynamic models are improved and validated for wind turbines on a scale of 10 MW and more. Special attention is paid to the improvement of low fidelity engineering (BEM based) models with higher fidelity (CFD) models but also with intermediate fidelity free vortex wake (FVW) models. The latter methods were found to be a good basis for improvement of induction modelling in engineering methods amongst others for the prediction of yawed cases, which in AVATAR was found to be one of the most challenging subjects to model. FVW methods also helped to improve the prediction of tip losses. Aero-elastic calculations with BEM based and FVW based models showed that fatigue loads for normal production cases were over predicted with approximately 15% or even more. It should then be realised that the outcome of BEM based models does not only depend on the choice of engineering add-ons (as is often assumed) but it is also heavily dependent on the way the induced velocities are solved. To this end an annulus and element approach are discussed which are assessed with the aid of FVW methods. For the prediction of fatigue loads the so-called element approach is recommended but the derived yaw models rely on an annulus approach which pleads for a generalised solution method for the induced velocities.
To reference this document use:
http://resolver.tudelft.nl/uuid:5f4cd125-d863-4cca-a801-0d5080c16dfc
DOI
https://doi.org/10.1088/1742-6596/1037/2/022013
ISSN
1742-6588
Source
Journal of Physics: Conference Series, 1037 (2)
Event
TORQUE 2018, 2018-06-20 → 2018-06-22, Milano, Italy
Part of collection
Institutional Repository
Document type
journal article
Rights
© 2018 J.G. Schepers, K. Boorsma, N. Sorensen, V. Voutsinas, G. Sieros, H. Rahimi, H. Heisselmann, E. Jost, T. Lutz, T. Maeder, A. Gonzalez, Carlos Ferreira, B. Stoevesandt, G. Barakos, N. Lampropoulos, A. Croce, J. Madsen