Print Email Facebook Twitter Motion Simulator 2-Axis Input Design for Angular Accelerometer Calibration Title Motion Simulator 2-Axis Input Design for Angular Accelerometer Calibration Author Jatiningrum, D. (TU Delft Control & Simulation) de Visser, C.C. (TU Delft Control & Simulation) van Paassen, M.M. (TU Delft Control & Simulation) Mulder, Max (TU Delft Control & Operations) Department Control & Operations Date 2016 Abstract The calibration of Angular Accelerometers requires a controlled test with a known acceleration profile. However, current turn-tables have been designed primarily for generating a constant rotational velocity. To generate a profile with varying angular acceleration we propose using constant rotational velocity on the two axes of a 2-axes motion simulator. The proposed sequence was developed to obtain the required rotational acceleration signal quality using only rotational velocity input. The identified pattern is applied to an envelope of test conditions, resulting in test matrix. This method provides an alternative means to generate inputs that can be used to calibrate angular accelerometers using calibration hardware that is not primarily designed to provide accurate acceleration inputs. To reference this document use: http://resolver.tudelft.nl/uuid:6cd67b83-ef05-4882-8a44-feb9f9f2e21d DOI https://doi.org/10.2514/6.2016-1434 Publisher American Institute of Aeronautics and Astronautics Inc. (AIAA), Reston Embargo date 2017-01-31 ISBN 978-1-62410-387-2 Source AIAA Modeling and Simulation Technologies Conference: San Diego, USA Event AIAA Modeling and Simulation Technologies Conference, 2016, 2016-01-04 → 2016-01-08, San Diego, United States Part of collection Institutional Repository Document type conference paper Rights © 2016 D. Jatiningrum, C.C. de Visser, M.M. van Paassen, Max Mulder Files PDF Motion_Simulator_2_Axis_I ... 09403_.pdf 927.91 KB Close viewer /islandora/object/uuid:6cd67b83-ef05-4882-8a44-feb9f9f2e21d/datastream/OBJ/view