Print Email Facebook Twitter Potentiometric response of Ag/AgCl sensor in Portland and slag cement pastes Title Potentiometric response of Ag/AgCl sensor in Portland and slag cement pastes Author Pargar, F. (TU Delft Materials and Environment) Koleva, D.A. (TU Delft Materials and Environment) van Breugel, K. (TU Delft Materials and Environment) Contributor Ye, Guang (editor) Date 2018 Abstract Determination of the free chloride content in a concrete structure is important for evaluation of the risk of corrosion of reinforcing steel. The Ag/AgCl sensor is sensitive to chloride ions and exhibits an open circuit potential (OCP) that depends on the chloride ions activity in the environment. The interference of hydroxide and sulfide ions in the pore solution of cementitious materials with the sensor affects the stability of the sensor’s OCP. In this paper, the sensor’s OCP (i.e. sensor reading) in Portland and slag cement pastes is monitored over 300 days of immersion in solutions with different chloride concentration. The results show the applicability of the chloride sensor for continuous and non-destructive determination of the free chloride content in Portland cement paste. The significantly different OCP of the sensor in slag cement paste was attributed to the interference of sulfide ions and formation of Ag2S on the sensor’s surface. Hence, the content of free chloride ions in slag cement paste could not be determined from the sensor’s OCP. The acid-soluble chloride and water-soluble chloride in the cement pastes were also determined after 300 days of immersion of specimens in the solutions. In case of Portland cement paste, the measured acid and water-soluble chlorides were compared to the sensor reading. The acid and water-soluble chlorides were higher than sensor reading. The release of physically and chemically bound chlorides into the acid and water solvents were the main cause for this trend. The results show the importance of cement type and chloride binding ability of hydration products for the sensor’s response and the acid and water-soluble chloride contents. To reference this document use: http://resolver.tudelft.nl/uuid:6cf27cac-6ccb-4364-a5a8-2f07e5aba38b Publisher Rilem ISBN 978-2-35158-214-5 Source Proceeding of the Workshop on Concrete Modelling and Material Behaviour in honor of Professor Klaas van Breugel: Special "Klaas van Breugel" Sessions during the Rilemweek 2018, PRO 126 Event Workshop on Concrete Modelling and Materials Behaviour in Honor of Professor Klaas van Breugel, 2018-08-27 → 2018-09-29, Lijm & Cultuur, Delft, Netherlands Part of collection Institutional Repository Document type conference paper Rights © 2018 F. Pargar, D.A. Koleva, K. van Breugel Files PDF Paper_Farhad_Pargar_2_.pdf 599.89 KB Close viewer /islandora/object/uuid:6cf27cac-6ccb-4364-a5a8-2f07e5aba38b/datastream/OBJ/view