The effect of tripping devices on a shock wave - boundary layer interaction

The effect of tripping devices on a shock wave - boundary layer interaction

Louman, Renee (TU Delft Aerospace Engineering)

van Oudheusden, Bas (mentor)
Schrijer, Ferdinand (mentor)
Giepman, Rogier (mentor)
Elsinga, Gerrit (mentor)

Delft University of Technology

Aerospace Engineering

2015-01-15

Shock Wave Boundary Layer Interactions (SWBLIs) occur frequently in supersonic and hypersonic flows and, depending on the strength of the shock wave and the state of the boundary layer, may lead to boundary layer separation. This can result in a multitude of problems, such as an increase in drag, a drop in air intake efficiency and high fatigue loads due to the inherent unsteadiness of the ow phenomenon. Since a turbulent boundary layer has a better capability to withstand the adverse pressure gradient that is inherent to the incident shock wave when compared to a laminar boundary layer, it is beneficial to have a turbulent boundary layer at the interaction. By forcing boundary layer transition only a short distance upstream of the interaction, the capability of the boundary layer to remain attached is increased while retaining the low skin friction coefficient of a laminar boundary layer for as long as possible.

http://resolver.tudelft.nl/uuid:742ec2a1-708e-41d8-95ea-27a2c0160045

Student theses

master thesis

© 2015 Renee Louman