On the use of machine learning models for prediction of compressive strength of concrete

On the use of machine learning models for prediction of compressive strength of concrete: Influence of dimensionality reduction on the model performance

Wan, Z. (TU Delft Materials and Environment)
Xu, Y. (TU Delft Materials and Environment)
Šavija, B. (TU Delft Materials and Environment)

2021

Compressive strength is the most significant metric to evaluate the mechanical properties of concrete. Machine learning (ML) methods have shown promising results for predicting compres-sive strength of concrete. However, at present, no in-depth studies have been devoted to the influence of dimensionality reduction on the performance of different ML models for this application. In this work, four representative ML models, i.e., Linear Regression (LR), Support Vector Regression (SVR), Extreme Gradient Boosting (XGBoost), and Artificial Neural Network (ANN), are trained and used to predict the compressive strength of concrete based on its mixture composition and cur-ing age. For each ML model, three kinds of features are used as input: the eight original features, six Principal Component Analysis (PCA)-selected features, and six manually selected features. The performance as well as the training speed of those four ML models with three different kinds of features is assessed and compared. Based on the obtained results, it is possible to make a relatively accurate prediction of concrete compressive strength using SVR, XGBoost, and ANN with an R-square of over 0.9. When using different features, the highest R-square of the test set occurs in the XGBoost model with manually selected features as inputs (R-square = 0.9339). The prediction accuracy of the SVR model with manually selected features (R-square = 0.9080) or PCA-selected features (R-square = 0.9134) is better than the model with original features (R-square = 0.9003) without dramatic running time change, indicating that dimensionality reduction has a positive influence on SVR model. For XGBoost, the model with PCA-selected features shows poorer performance (R-square = 0.8787) than XGBoost model with original features or manually selected features. A possible reason for this is that the PCA-selected features are not as distinguishable as the manually selected features in this study. In addition, the running time of XGBoost model with PCA-selected features is longer than XGBoost model with original features or manually selected features. In other words, dimensionality reduction by PCA seems to have an adverse effect both on the performance and the running time of XGBoost model. Dimensionality reduction has an adverse effect on the performance of LR model and ANN model because the R-squares on test set of those two models with manually selected features or PCA-selected features are lower than models with original features. Although the running time of ANN is much longer than the other three ML models (less than 1s) in three scenarios, dimensionality reduction has an obviously positive influence on running time without losing much prediction accuracy for ANN model.

Compressive strength prediction
Dimensionality reduction
Machine Learning models
Principal Component Analysis

http://resolver.tudelft.nl/uuid:7cebaa6b-3ec7-4ee0-b8d9-d879e94d496f

https://doi.org/10.3390/ma14040713

1996-1944

Materials, 14 (4), 1-23

Institutional Repository

journal article

© 2021 Z. Wan, Y. Xu, B. Šavija