Straightening and simplifying a multi-view stereo mesh of a city

Straightening and simplifying a multi-view stereo mesh of a city

Kang, Yuxuan (TU Delft Architecture and the Built Environment; TU Delft Urban Data Science)

Ledoux, H. (mentor)
Diakite, A.A. (mentor)
Meijers, B.M. (graduation committee)

Delft University of Technology

Geomatics

2017-07-06

With fast development of both hardware and software, 3D real-world scene
data, for example multi view stereo mesh, can be acquired efficiently. And
since 3D city data are more realistic and more useful in some applications,
they begin to appear in the market.
Although the generation of 3D city data like multi view stereo mesh
can be fast, the data might contain many measurement errors. Because
of these measurement errors, some regular objects such as building, ground
etc sometimes are not exactly flat. Points which should be on the same
plane have small deviations from the plane they belong to, which makes the
flat surface bumpy. One way to solve this problem is to control the quality
of data acquisition and data processing. Unfortunately, even the data error
sources are known, it is not possible to eliminate all the errors, and accurate
but expensive data acquisition equipment sometimes are not affordable. In
that case, processing existing data is much more economic and time saving
compared with collecting data again.
This MSc thesis aims at solving above problem. It provides a methodology
on straightening planar parts of multi view stereo mesh of the city. After
straightening the mesh, this thesis also tries to simply the mesh by removing
redundant vertices and faces in the mesh, so that the data will be clean and
the data storage can be reduced.

http://resolver.tudelft.nl/uuid:8f3a74c2-3264-4433-adc9-217dfa94754a

Student theses

master thesis

© 2017 Yuxuan Kang