Roll stability control of autonomous truck combinations

Roll stability control of autonomous truck combinations

Trombitás, Daniel (TU Delft Mechanical, Maritime and Materials Engineering; TU Delft Delft Center for Systems and Control)

Keviczky, T. (mentor)
Mendel, M.B. (graduation committee)
Shyrokau, B. (graduation committee)
Delimpaltadakis, I. (graduation committee)

Delft University of Technology

Mechanical Engineering | Systems and Control

2019-07-09

Commercial heavy vehicles are especially prone to rolling over due to their inherent properties, such as the high centre of gravity - track width ratio and compliant chassis frame. Autonomous trucks cannot become widespread without eliminating this danger by guaranteeing rollover-free vehicle motion. Currently existing Roll Stability Control implementations rely on the assumption of having a responsible driver behind the steering wheel -- therefore, unsupervised driving will need a higher level of roll safety than what the currently used methods can provide. Fortunately, there are two main attributes of self-driving vehicles that can be utilized to achieve this goal: Information about the reference path ahead of the truck will be available and the used algorithms may have a full control authority over the available actuators.

This thesis project developed two, redundant rollover mitigation techniques to be run in parallel, for a tractor-trailer combination: The proactive and reactive Roll Stability Control methods. These vehicle motion controllers are separate, independent functional entities.

While the proactive approach attempts to prevent upcoming events, the reactive Roll Stability Control is designed to mitigate imminent rollovers that could not be anticipated based on motion reference information. This controller is placed within the motion control paradigm of Control Allocation. The objective of Control Allocation is to coordinate different actuators to achieve both longitudinal and yaw accelerations as desired by the higher-level tracking controller. Roll stability is achieved by extending the set of functionalities of this framework, using both brakes and steering to realize the needed interventions. Emphasis is put on accurate wheel lift-off detection, using lateral acceleration, steering angle and accurately estimated roll angle signals.

Design choices during syntheses of both controllers were made based on the conclusions of a thorough analysis of roll dynamics, carried out using a high-fidelity vehicle model, provided and validated by Volvo Group Truck Technologies. Subsequently, both controllers were implemented within Volvo's real-time framework. While the proactive method's performance was only assessed using simulations, the reactive controller was tested on Volvo's proving grounds.

The thesis concludes that achieving a higher level of roll stability of (autonomous) heavy vehicles is possible, whilst having a less conservative overall behaviour compared to traditional approaches. This research contributes to making a step towards the next generation of rollover prevention for automated trucks.

Autonomous driving
Rollover prevention
Model based

http://resolver.tudelft.nl/uuid:b719b6b2-82b5-4439-a6bd-f3173ff81a5e

2021-07-09

Student theses

master thesis

© 2019 Daniel Trombitás