Print Email Facebook Twitter Skin-stringer separation in post-buckling of butt-joint stiffened thermoplastic composite panels Title Skin-stringer separation in post-buckling of butt-joint stiffened thermoplastic composite panels Author van Dooren, K.S. (TU Delft Aerospace Structures & Computational Mechanics) Tijs, B.H.A.H. (TU Delft Aerospace Structures & Computational Mechanics; Fokker/GKN Aerospace) Waleson, J. E.A. (Fokker/GKN Aerospace) Bisagni, C. (TU Delft Aerospace Structures & Computational Mechanics) Date 2023 Abstract Two aeronautical thermoplastic composite stiffened panels are analysed and tested to investigate the buckling behaviour, the skin-stringer separation and the final failure mode. The panels are made of fast crystallising polyetherketoneketone carbon composite, have three stringers with an angled cap on one side, and are joined to the skin by a short-fibre reinforced butt-joint. The panels contain an initial damage in the middle skin-stringer interface representing barely visible impact damage. Finite element analysis using the virtual crack closure technique are conducted before the test to predict the structural behaviour. During the tests, the deformation of the panels is measured by digital image correlation, the damage propagation is recorded by GoPro cameras and the final failure is captured by high speed cameras. The panels show an initial three half-wave buckling shape in each bay, with damage propagation starting shortly after buckling. A combination of relatively stable and unstable damage propagation is observed until final failure, when the middle stringer separates completely and the panels fail in an unstable manner. The test results are compared to the numerical prediction, which shows great agreement for both the buckling and failure behaviour. Subject BucklingButt-jointFinite element analysisTestingThermoplastic compositeVirtual Crack Closure Technique To reference this document use: http://resolver.tudelft.nl/uuid:c2e905cd-9cd3-4d96-aae3-bcbcd8ae0fc0 DOI https://doi.org/10.1016/j.compstruct.2022.116294 ISSN 0263-8223 Source Composite Structures, 304 Part of collection Institutional Repository Document type journal article Rights © 2023 K.S. van Dooren, B.H.A.H. Tijs, J. E.A. Waleson, C. Bisagni Files PDF 1_s2.0_S0263822322010261_main.pdf 7.81 MB Close viewer /islandora/object/uuid:c2e905cd-9cd3-4d96-aae3-bcbcd8ae0fc0/datastream/OBJ/view