Print Email Facebook Twitter Design of grabs under operational conditions (abstract) Title Design of grabs under operational conditions (abstract) Author de Vries, Niels (TU Delft Mechanical, Maritime and Materials Engineering; TU Delft Transport Engineering and Logistics) Contributor Schott, D.L. (mentor) Mohajeri, M. (mentor) Jovanova, J. (mentor) de Kluijver, W. (mentor) Miedema, S.A. (graduation committee) Degree granting institution Delft University of Technology Programme Marine Technology | Transport Engineering and Logistics Date 2020-09-24 Abstract Bulk materials such as iron ore transported by bulk carriers are commonly unloaded by the use of grabs. The unloading process is time consuming and increasing the unloading capacity is of big importance for terminals. A validated co-simulation developed by the TU Delft in cooperation with Nemag enables to test grabs in the virtual environment. In practice a variation in unloading capacity is seen, due to dynamic operational conditions, such as different crane operators and bulk surface irregularities. To improve grab design the influence of operational conditions on the unloading capacity is investigated. Based on those results a design modification has been proposed and showed promising results. Subject GrabsDEMOperational conditionsOptimization To reference this document use: http://resolver.tudelft.nl/uuid:c569046b-26e5-4cb7-9bb0-60f378b6668f Part of collection Student theses Document type master thesis Rights © 2020 Niels de Vries Files PDF Abstract.pdf 45.61 KB Close viewer /islandora/object/uuid:c569046b-26e5-4cb7-9bb0-60f378b6668f/datastream/OBJ/view