Print Email Facebook Twitter Design of a data collector for HEMS crew during OHCA Title Design of a data collector for HEMS crew during OHCA Author Zhang, Yu (TU Delft Industrial Design Engineering) Contributor Goossens, R.H.M. (mentor) van Heur, R.J.H.G. (graduation committee) Dos Reis Miranda, Dinis (graduation committee) Degree granting institution Delft University of TechnologyErasmus Medical Center Programme Integrated Product Design Date 2020-08-31 Abstract The HEMS crew is planning to conduct research on implementing ECPR treatment during OHCA cases. A data collector that collects time and chest compression data is needed for the research. Thus, this graduation project is focused on the design of a data collector for HEMS crew during OHCA. This report describes the whole process of developing the design of the data collector. The process starts with a design brief that elaborates the design assignment. Then four cycles of project development are carried out: the first cycle is focused on context analysis and exploration of possible solutions; the second cycle is focused on the electronics prototype and data transfer system building; the third cycle is focused on the housing design of the collector; the last cycle is concluded with a validated final design and recommendations on implementation. This project collaborates with Dr. Dinis Reis Miranda from the HEMS lifeliner 2 and Erasmus MC - University Medical Center. Subject HEMSCPRECMOOHCAData collector To reference this document use: http://resolver.tudelft.nl/uuid:c91ff997-644d-4637-9a7a-d7c8bffc34e1 Part of collection Student theses Document type master thesis Rights © 2020 Yu Zhang Files PDF Master_Graduation_Thesis_ ... 363515.pdf 57.81 MB PDF CPR_Data_Collector_design ... 363515.pdf 7.95 MB Close viewer /islandora/object/uuid:c91ff997-644d-4637-9a7a-d7c8bffc34e1/datastream/OBJ1/view