Print Email Facebook Twitter Using a drinking water treatment simulator for operator training: Accelerating the simulated process leads to an increase in learning Title Using a drinking water treatment simulator for operator training: Accelerating the simulated process leads to an increase in learning Author Van der Wees, M. Contributor De Winter, J.C.F. (mentor) Wieringa, P.A. (mentor) Faculty Mechanical, Maritime and Materials Engineering Department BioMechanical Engineering Date 2009-10-27 Abstract The drinking water treatment industry is becoming increasingly centralized and automated. This requires a different operator training approach then the traditional on the job training. To address this requirement a drinking water treatment plant simulator was developed. A major advantage of such a simulator might be that the normally very slow process can be accelerated, giving an increase in feedback to the trainees. In this paper the effectiveness of training on an accelerated simulated process is investigated. Four groups of subjects were trained on the Waterspot Simulator, three groups (of various experience) trained at 60x accelerated simulation speed, and one group trained at real-time simulation speed. The results showed that the Waterspot Simulator could distinguish between experienced operators and laymen and that the groups that trained with 60x accelerated simulation speed outperformed the group that trained at real-time, when they were compared ona real-time quasi transfer of training task. Subject simulatortrainingdrinking wateroperatorautomationman machine systemacceleration To reference this document use: http://resolver.tudelft.nl/uuid:cdc194ff-394b-4772-a0ed-feada1dd7a06 Part of collection Student theses Document type master thesis Rights (c) 2009 Van der Wees, M. Files PDF Afstudeerwerk_Michiel_van ... mpleet.pdf 1.75 MB Close viewer /islandora/object/uuid:cdc194ff-394b-4772-a0ed-feada1dd7a06/datastream/OBJ/view