Static and Fatigue Tests on Cementitious Cantilever Beams Using Nanoindenter

Static and Fatigue Tests on Cementitious Cantilever Beams Using Nanoindenter

Gan, Y. (TU Delft Materials and Environment)
Zhang, H. (TU Delft Materials and Environment)
Šavija, B. (TU Delft Materials and Environment)
Schlangen, E. (TU Delft Materials and Environment)
van Breugel, K. (TU Delft Materials and Environment)

2018

Cement paste is the main binding component in concrete and thus its fundamental properties are of great significance for understanding the fracture behaviour as well as the ageing process of concrete. One major aim of this paper is to characterize the micromechanical properties of cement paste with the aid of a nanoindenter. Besides, this paper also presents a preliminary study on the fatigue behaviour of cement paste at the micrometer level. Miniaturized cantilever beams made of cement paste with different water/cement ratios were statically and cyclically loaded. The micromechanical properties of cement paste were determined based on the measured load-displacement curves. The evolution of fatigue damage was evaluated in terms of the residual displacement, strength, and elastic modulus. The results show that the developed test procedure in this work is able to produce reliable micromechanical properties of cement paste. In addition, little damage was observed in the cantilever beams under the applied stress level of 50% to 70% for 1000 loading cycles. This work may shed some light on studying the fatigue behaviour of concrete in a multiscale manner.

cement paste
miniaturized cantilever beam
micromechanics
fatigue
nanoindenter

http://resolver.tudelft.nl/uuid:d5eaf6e8-e36f-4694-b755-57182189f881

2072-666X

Micromachines, 9 (12)

Institutional Repository

journal article

© 2018 Y. Gan, H. Zhang, B. Šavija, E. Schlangen, K. van Breugel