Print Email Facebook Twitter Modeling Potential Liquefaction during an Earthquake under a Breakwater with PM4Sand Title Modeling Potential Liquefaction during an Earthquake under a Breakwater with PM4Sand Author van Lent, E.G. (TU Delft Civil Engineering and Geosciences) Contributor Vardon, P.J. (mentor) Brinkgreve, R.B.J. (graduation committee) Hicks, M.A. (graduation committee) Lanzafame, R.C. (graduation committee) Lubking, P. (graduation committee) van Herpen, F. (graduation committee) Degree granting institution Delft University of Technology Date 2020-07-28 Abstract The stability of breakwaters in seismically active areas is not always guaranteed. A new approach to model a breakwater subjected to an earthquake is with PM4Sand. The goal of this research is to find if breakwaters subjected to earthquakes can be correctly modelled with PM4Sand.To investigate PM4Sand a breakwater subjected to an earthquake on centrifuge scale is modelled in Plaxis. The soils of the centrifuge test are modelled with PM4Sand and UBCSand. After calibrating the soil parameters and incorporating the proper earthquake signal results are generated and compared. The investigated results focus on the settlements of the caisson, deformations of the breakwater and generated Excess Pore Water Pressures underneath the breakwater due to the earthquake. Comparing the results from the numerical models with the centrifuge test result show that both the UBCSand model and PM4Sand can give comparable results for the settlements and deformations. However, both UBCSand and PM4Sand were not able to give the correct EPWP development underneath the breakwater.Due to the incorrect behaviour of the EPWP underneath the breakwater resulting from the numerical models, this research is not able to conclude that PM4Sand can be used for modelling breakwaters subjected to earthquakes. Further research is needed to investigate the development of EPWP underneath the breakwater during an earthquake. Focus points of future research can be: the influence of the amplitude of an earthquake signal on the EPWP, the influence of modelling a centrifuge test on the behaviour of the EPWP and the influence of the initial static shear stress on the EPWP development. Subject PM4SandBreakwaterEarthquakeUBCSandLiquefactionPlaxis 2D To reference this document use: http://resolver.tudelft.nl/uuid:147aded2-e17e-4d24-ab7b-661bd1d8818c Part of collection Student theses Document type master thesis Rights © 2020 E.G. van Lent Files PDF MSc_Thesis_Ewoud_van_Lent_Final.pdf 20.39 MB Close viewer /islandora/object/uuid:147aded2-e17e-4d24-ab7b-661bd1d8818c/datastream/OBJ/view