A 7μW Offset-and Temperature-Compensated pH-to-Digital Converter

A 7μW Offset-and Temperature-Compensated pH-to-Digital Converter

Heidary Shalmany, S. (TU Delft Electronic Instrumentation)
Merz, Matthias (NXP Semiconductors)
Fekri, A. (AMS Sensors Belgium)
Chang, Z.Y. (TU Delft Electronic Instrumentation)
Hoofman, Romano J.O.M. (NXP Semiconductors)
Pertijs, M.A.P. (TU Delft Electronic Instrumentation)

2017

This paper demonstrates a micropower offset- and temperature-compensated smart pH sensor, intended for use in battery-powered RFID systems that monitor the quality of perishable products. Low operation power is essential in such systems to enable autonomous logging of environmental parameters, such as the pH level, over extended periods of time using only a small, low-cost battery. The pH-sensing element in this work is an ion-sensitive extended-gate field-effect transistor (EGFET), which is incorporated in a low-power sensor front-end. The front-end outputs a pH-dependent voltage, which is then digitized by means of a co-integrated incremental delta-sigma ADC. To compensate for the offset and temperature cross-sensitivity of the EGFET, a compensation scheme using a calibration process and a temperature sensor has been devised. A prototype chip has been realized in a 0.16 μm CMOS process. It occupies 0.35 × 3.9 mm2 of die area and draws only 4 μA from a 1.8 V supply. Two different types of custom packaging have been used for measurement purposes. The pH sensor achieves a linearity of better than ±0.1 for pH values ranging from 4 to 10. The calibration and compensation scheme reduces errors due to temperature cross-sensitivity to less than ±0.1 in the temperature range of 6°C to 25°C.

http://resolver.tudelft.nl/uuid:a5661967-c73d-46ac-b4af-b8f8c6941561

https://doi.org/10.1155/2017/6158689

1687-7268

Journal of Sensors (online), 2017, 1-8

Institutional Repository

journal article

© 2017 S. Heidary Shalmany, Matthias Merz, A. Fekri, Z.Y. Chang, Romano J.O.M. Hoofman, M.A.P. Pertijs