Application of an inverse analysis using the Ensemble Kalman Filter method to a deep excavation case

Application of an inverse analysis using the Ensemble Kalman Filter method to a deep excavation case: with validation of constitutive soil models

Bartczak, Konrad (TU Delft Civil Engineering and Geosciences)

Brinkgreve, Ronald (mentor)
Hicks, Michael (mentor)
Vossepoel, Femke (mentor)
Tan, Shuhong (mentor)
Mavritsakis, Antonis (mentor)

Delft University of Technology

2020-01-14

Displacement control is of utmost importance in deep excavation design and is usually based on numerical modelling, e.g. Finite Element Method (FEM). Numerical methods tend to be more conservative when analysing soil behaviour during deep excavation, whereas for practical and economic reasons this is not favoured. The inverse analysis allows for the identification of the soil parameter set that can provide the measurements observed in the monitoring when it is applied in the model. When performed in a probabilistic concept, it reduces parameter uncertainty and enables the stochastic prediction of future soil behaviour. In this thesis, capabilities and limitations of difference advanced constitutive models are investigated. The Generalized Hardening Soil Small strain model (GHS) presents a positive aspect in modelling soil behaviour during deep excavation with its various stress/strain dependency settings. Because of the uncertainties originating from the size of the domain and limitations of site investigation, the soil parameters can only be shown as probability distributions. In order to make that distribution more accurate, comparative selection of several inverse analysis optimization algorithms is performed. Thereafter, choice of the relevant parameters is done based on the conducted sensitivity analysis and engineering judgement. Having the most competitive optimization approach selected, remote scripting with Python is used to utilise Finite Element (FE) modelling in the 2D Plaxis software. The input parameters are iteratively updated with response observation (diaphragm wall deflections) using the Ensemble Kalman filter optimisation algorithm based on a chosen excavation stage. The re-calibrated parameters are checked with the data, which was used to create synthetic measurements made using the same FE, to perform reliability assessment of the developed Python-based algorithm and investigate its capabilities and limitations. The further development of the presented optimisation method is expected to increase certainty in setting alarm thresholds in the applications of the Observational Method.

Optimisation Algorithms
Kalman Filter
Ensemble Kalman filter
Plaxis 2D
Python
Inverse Analysis
Material Model
Deep excavation

http://resolver.tudelft.nl/uuid:e1c3b336-9c1d-412b-a9bb-1260f84a0fd9

Student theses

master thesis

© 2020 Konrad Bartczak